wannars125 Posted August 29, 2009 Share Posted August 29, 2009 Does anyone know what the torque wrench setting is for the marauder? My mate has one but the service manual that came with it (second hand) is in German!**Edit - even better would be if anyone knows the size of the socket needed for the bolt on the rear wheel too! Quote Link to comment Share on other sites More sharing options...
Bogof Posted August 29, 2009 Share Posted August 29, 2009 Does anyone know what the torque wrench setting is for the marauder? My mate has one but the service manual that came with it (second hand) is in German!**Edit - even better would be if anyone knows the size of the socket needed for the bolt on the rear wheel too! Torque - 47ft/lbsSize - 17mm The RH nut is 22mm and the LH end of the axle is 17mm. The hand-wrench supplied in the owner'stool kit is not robust enough for this application, so most users loosen and tighten with a 17mm wrench on the LH side of theaxle. You can use the tool kit wrench to secure the RH nut while tightening or loosening, however...You just won't be able toloosen the axle nut with it. Use a pull-bar with the 17mm socket, if possible. Also, a large adjustable wrench on the 22mm nutworks nicely. Quote Link to comment Share on other sites More sharing options...
wannars125 Posted August 29, 2009 Author Share Posted August 29, 2009 Cheers Bogof! I have both so should be able to help him out adjusting the chain. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.