Carter101
Registered users-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Community Map
Everything posted by Carter101
-
Hi guys. I have a honda cbr125r 2004 model and basically the engine that's in it is not worth repairing. (Costs way to much) I have found an engine to buy but it is from a 2007 model which is fuel injected rather than carb. Does anyone know if there Is any differences between these 2 engines? Will there be any problems or will it connect straight up? Thanks.
-
Hi guys. Got a question would to much pressure in the crankcase cause a bike to not start?
-
Hi guys. Can anyone recommend a good battery charger that is quite cheap as well. I need it for a 12v 6amp battery and a 5 amp battery. As they are both a little flat. Thanks.
-
Haha nope it was stuck on there pretty bad. Have now manged to get it off
-
OK thanks. I'll try that and hopefully It will eventually come free. If you need any advice on servicing it when you do get it out let me know, I did one recently. Thank you. That would be helpful. I'll let you know how it goes when I've attempted to get the starter motor off
-
I've got the alternator cover off yes. I've tried popping it out from that way as well but it still won't move Ok, I can only suggest trying to knock it one way and another until you free the seal where it plugs into the casing. It's in a fairly exposed location so maybe a bit of corrosion has set in . Try some penetrating oil and then jiggle it up and down whole tapping it from the alternator side . Don't hit anything directly with a metal hammer though like in the useless video I found. Good luck. OK thanks. I'll try that and hopefully It will eventually come free.
-
I've got the alternator cover off yes. I've tried popping it out from that way as well but it still won't move
-
Hi everybody. I'm having some real trouble with my Honda cbr125r. I have managed to diagnose that the starter motor is not working. Now the problem is that I can't get the thing off the engine to change it. I have taken all the necessary bolts off but the thing won't budge at all I've even hit it with a hammer a few times but still nothing. Does anyone have any suggestions? As it's really annoying me now and I can't ride it until I take the old one off and put the new one I have on. Thanks
-
I changed the carb because old one was cutting out when I took choke was off and also fuel/air screw was missing
-
I set the idle speed when it was fully warmed up. Yes it does it everytime and takes a minute or two to turn back on.
-
The new carb is stock. I have set it to factory settings. Also the clutch is free because I can put it in first and it rides but then the bike just cuts out when slowing down
-
I have set the idle to the right speed. I also have put a brand new carb in it.
-
I have a problem with my 125cc. I can put it in first and it rides well but then when i come to a stop and drop it to first it completely stalls and takes a few mins to turn back on. Any help on this would be great. Sorry if this post is in the wrong place not sure where to put it.