billysugger

PRAT

There's an answer to that, Don't visit afar

I was actually quite lucky, I'd just reached a part of the dual carriageway where there is a area of 3 or 4 houses and a barrier between them and the A6, a van driver had seen me pushing it so stopped and offered to take me to get fuel and bring me back to the bike- there are still some decent folk out there. The strangest thing is I could not figure out how my fuel got nicked in the first place. Not only was the cap locked it's fuel injection, so needs the pump running, but I definitely had a nearly full tank as I filled up every 4 days due to work commute and this was a weekend and a regular top up day ready for a bimble

Try pushing it after finding out someone has nicked your fuel like me on the A6 to Kettering, halfway from Rothwell you'll definitely lose weight

Try this site, it may help you decide https://ridewrightwheels.com/pages/motorcycle-tire-wheel-fitment-chart?currency=USD

Ha ha, good old Babylon 5. I had the whole series in a box set including the films

Just think about biscuits, that usually does it. nothing inoffensive about biscuits (unless it's a garibaldi)

I use to ride my 500 to work (and back), for 4 miles either way. When I did the usual maintenance/cleaning at the weekend I use to drain the breather tube, that had a stopper fitted to prevent leaking. The amount of dirty emulsified crap that came out was ridiculous,and was the result of the engine never reaching a decent temperature, and meant more frequent oil changes. Also possible its one of the reasons the conrod broke

Judging by the colour of that oil I would probably have ran some engine flush through before adding the new oil

I don't know if anyone else has noticed it, but LEDs do not appear to have a visible beam, ie all you see is the focus point. If I turn my spots on they are very bright, but only at the point the light hits the ground, yet if I shine a normal bulbed torch on the same area it also illuminates the surrounding area between torch and road

Someone may come along and put me right, but if you just mask the lens you end up with a daylight only MOT, meaning you could not ride after what is known as "lights on" which is when Street lights are turned on, not just when it's dark

The idea behind the kick up was just to illuminate hedges and other stuff at the nearside as well as the road, I'm not certain its a legal requirement like the RHS

Try here https://ridershandbook.com/bikes-and-equipment/how-to-align-your-motorcycle-headlight-for-mot/

That is why I said a mirror image. the low line on the left needs to be replicated as much as you can on the right

Isn't there any way of creating a mirror image of your first pic? The reason being that's the pattern they look for in the MOT. you don't necessarily need the high beam side to match, but the low beam is critical

Yes, be very careful about headlights. I bought a brand new replacement for my 500,as the lens was plastic and beginning to fog. Headlight came from a reputable dealer so you would expect it to be OK. Err, sadly no. light was really good quality, being all metal, and fitted in place like a glove. I wired it all up, turned it on and the difference was blinding (excuse the pun). It was then I noticed the glaringly obvious, the beam pattern was the wrong way round,like yours. I took it all off, repacked ready to return then contacted the seller. The response? It's CE marked so legal to use, so would not accept its return. I pointed out the CE mark just meant it was made in, and for, the European market where they ride on the wrong side of the road but no joy. Its still stuck on a shelf in my lock-up

It's the ecoboost 3 that my mate John was talking about. According to him he just swaps the whole engine, and I think the other one gets returned to Ford

Have you tried manualslib, you may be able to down load a manual from there

Is that what you would call a peekcock?

I'm sat here in my humble abode And thinking of creating an ode. I don't have the time To make it all rhyme So I'll just settle for silent mode

You know this tune Rode my Honda to the Rhonda but the valley was dry Lifted my visor and got smacked in the eye, It wasn't a wasp Just a bloody big fly

Saves you a fortune in electric costs

I tuned up my 1977ish Honda 125s after deciding to strip the engine to learn about mechanicing I had the inlet and outlet bores gas flowed and polished to a mirror finish, the head was skimmed to lose about 10thou less than standard,the pistons were changed to a different profile with cutouts to accept the valve heads. All in all, it went from 16.5 bhp stock to closer to 28bhp. I never got to find out it's full potential because on my first ever speed run on it, out near Yelverton, due to crazy levels of steering wobble. I was showing an indicated speed of 110mph at 2/3rds throttle. The fitted tyres were Avon Roadrunners, but the speed rating was about 88mph and at the time I don't think there were any out there of the size needed but a higher speed rating so I never tried it again .Incidentally ended crashing on black ice and doing considerable damage to my right knee and by the time I was sorted out and released from hospital the bike had disappeared from where it had been parked up while I was fixed up

My cam chain in the 500 has done close to 130.000 miles yet was perfectly fine when checked during a engine rebuild after busting a con rod

Little bit late to this party but here goes. My CBF600SA had a really poor headlight set up, and when on the way home on back roads from work at night it was pretty horrendous. I looked online and found a HALO set up designed to fit the bike so I bought 2. I fitted one in the dipped beam side and tucked the slave unit in the gap between the frame and front fairing. What a difference!!! The bike has been MOT'd 3 times since, and has passed the beam test each time. Since then I have also fitted 2 LED spots low down, and these cover the area below the output of the HALO, so the road in front is well lit without dazzling oncoming traffic, unless I hit a rise in the road