Guest Posted December 13, 2010 Posted December 13, 2010 Hi to all againMy motorcycle won't start this morning as its damp and have flooded the engine, so I decided to remove the spark plug, what should be an easy job.WRONG !!!The two car spark plug socket I have, none of these fit.So I presume I require some special costly fandangled socketPlease can some kind person adviseCheersBobs928 Quote
Stu Posted December 13, 2010 Posted December 13, 2010 probably a 10mm plug that requires a 10mm socket at the cost of about 6-7 quid Quote
andyc Posted December 14, 2010 Posted December 14, 2010 Did the plugs on my GSXR with just a standard socket....then thin nose pliers to lift the plug out. Plug sockets not essential (but does make life easier) Quote
argentum40 Posted December 14, 2010 Posted December 14, 2010 had the same on my scoot when i replaced the plug... my socket set had the large and small plug sockets and the scoot was in the middle had to buy a 12mm plug socket off the bay of E which was only a few quid Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.