bluenose Posted May 22, 2012 Posted May 22, 2012 Hi all noticed this morning that my front right indicator isn't working and the back one is flashing really fast,the left ones are fine. I checked the front one and the bulb is fine any ideas? Quote
eastanglianbiker Posted May 22, 2012 Posted May 22, 2012 i woul change the bulb first off as they can look fine and not be,hen check the earth on the indicator,if yours has 2 wires coming out into main loom then you need to check you have got a live and earth feed Quote
Stu Posted May 22, 2012 Posted May 22, 2012 also check the contacts in the bulb holder these are prone to going rusty and no contact Quote
Colin the Bear Posted May 28, 2012 Posted May 28, 2012 Swap bulbs around, if the fault moves with the bulb, sorted Quote
pointblank0 Posted June 9, 2012 Posted June 9, 2012 Swap bulbs around, if the fault moves with the bulb, sorted As he said. Do this first as it's free! A rapidly flashing indicator is an interuption in the circuit, be it blown bulb or other. If bulb isn't blown, then sand down the connectors in the lamp, probably a poor connection. No need to go searching around all the wiring, it will be restricted to that bulb and/or housing of that bulb. Fear not!PS, indicators do tend to collect water Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.