tail tidy

[soll]

right i have decided i want a tail tidy on my 125.

any suggestions on how to find a correct fitting one.

BIke Kymco CK1 125 2014

any ideas?

[maccy]

If you cant find one for your bike, just get a universal one.

You might have to drill holes in the right places though

[mealexme]

You could do what I've done with the RR and simply remove the current set up and replace it with stainless steel L brackets from your local DIY store to connect the plate to the bike. The angles should be just about right.

As for the indicators, you have a few options. Do what I did and get some sheet metal to make your own brackets and find a bolt somewhere that you can connect it to.

before:

after:

Or, try and glue/tape/velcro another set of L-brackets to the rear of the plate and attach the indicators to that

Oh, and the number plate is a tiny bit smaller that it was before, but shhh

[Mr Fro]

You could do what I've done with the RR and simply remove the current set up and replace it with stainless steel L brackets from your local DIY store to connect the plate to the bike. The angles should be just about right.

 

That's pretty much what I did for my track bike, bend up a small bit of aluminium sheet (8"x4" ish) with a couple of bolts to hold the plate on and a couple more to secure the holder to the tail. If I'd thought about it, I'd have bent a couple of tabs for the indicators but it doesn't have any of those at the moment.

[soll]

cool if the weathers pleasant enough this weekend ill take some pictures and take off some bits to see whats holding it all together.

[Guest]

Oh, and the number plate is a tiny bit smaller that it was before, but shhh

 

Watch out you'll get alot of shit from people on here about that