Will0104 Posted October 27, 2015 Share Posted October 27, 2015 Today i fitted a new dashboard on my ybr 125 due to the old one being smashed when i had an accident.When i first got it home after the accident (only dash was actually damaged and i was only round the corner from my house) i noticed that my front indicator on the left was not working at all, and the back left was just a constant light and the same with the light on my dash that says indicating left.Strangely enough when i hit my dash back into place (it was wonky) the indicators worked normally again.Now the problem is back and as i said before i have just replaced the dash. The bulb is not blown and the right side is working perfect.Anyone know a common way to fix this? one thing is that my battery is now almost dead atm to the point where i had to hill start it.any help would greatly be appreciated Quote Link to comment Share on other sites More sharing options...
eastanglianbiker Posted October 27, 2015 Share Posted October 27, 2015 check the bulb in the left hand indicator and also the wire going to it from behind the dash Quote Link to comment Share on other sites More sharing options...
Arwen Posted October 27, 2015 Share Posted October 27, 2015 Urm... I'd check the wires are not frayed or anything? also, if you have a flasher relay, check that is plugged in right ( mine is under the clocks, behind the headlight. ) Quote Link to comment Share on other sites More sharing options...
Will0104 Posted October 29, 2015 Author Share Posted October 29, 2015 okay i will check later on today, i know its definitely not a blown bulb i checked at the time Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.