Guest Posted February 14, 2007 Share Posted February 14, 2007 imy cbr 600f, 05, has a rattle between 4500, 5000 rpm if going through the revs slowly dont here it if i accelerate quickly , antone else have this problem? or is it my immagination or what might it be , done 30,000 miles but other thanthis is perfect Quote Link to comment Share on other sites More sharing options...
Stealth Posted February 14, 2007 Share Posted February 14, 2007 Hi GaryOne thing to look at is the cam chain tensioner - it's a known problem.http://www.bossturbo.com/cbr/howto_cct.shtml Quote Link to comment Share on other sites More sharing options...
Stu Posted February 15, 2007 Share Posted February 15, 2007 wheres the rattle from top bottom ?is it a rattle or a tap ?but i would reckon cam chain or valve clearances Stu Quote Link to comment Share on other sites More sharing options...
Guest Posted February 16, 2007 Share Posted February 16, 2007 dunno if its top or bottom ,could it be my drive chain. asked my local bike shop to have a listen co i thought it might be valves but he said it sounds fine , might just be me. Quote Link to comment Share on other sites More sharing options...
Guest Posted February 16, 2007 Share Posted February 16, 2007 i razzed about on an old CBR600 jellymould, good little bike top whack 150 on the clocks 500rpm into the red and that rattled and had 36k on it and its still about, rode through winter, think they need a major service at 30k though check your Haynes, it taught me all i know! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.