Karimura

Cheers guys! if I said 9, everyone would of not done it. I know the attenion span of you lot

is it different to the alternator?. Update guys too, I have tried connecting jump leads to the battery, then the starter motor ect. it makes the tick noise that wants to start then thats as far as it gets But I have 4 spark plugs so that wont be the factor, will it still just be 1 single wire that somewhere is disconnected? I tried both my batteries and alternators just incase

Thanks biking community! 30 of you lovely chaps have done it shame on the 300 other readers ^,- unless its just stu refreshing the page many times

Thanks guys!, might be able to get a better grade, 1 more step towards being a diplomat, - I am sure they will all put the young age bracket anyway

Hello ladies and guys, I know we see many surverys from students about motorbikes or something safety related, But this is literally for me returning to college to get a better education!, (plus being here for many years should count right?) ANYWAY, it is literally a few questions about shopping online, I have set it to not need emails or personal details, you can even do it 5 times if you really are an amazing person >.< I only need a couple of guys, will be greatful anyway, since I lack people to ask in person https://www.surveymonkey.com/r/7WLGSR9 Thank you lovely children <3 love you all -PS- it is not professional, I will be just using the data!, if it makes no sense it's your fault

Really appreciate the long time to type guys! Saturday will be my report back! (notes) - I did strip the 6 connecter pins from the battery side to the alternator, re connect them because they were in a bad state.

Thank you guys Yeah the fuse was blown from the starter, had to change it. when I turn on my bike and try the electrics the wires around that area are quite warm, I read that this could be part of the bad wiring. What is meant by "frame", like if it is touching the frame? I looked online and think starter motors are about 25 pound

Hello gents and ladies I have tried to do as much as i can alone and without help, but now I climb the mountain to task the gurus and wise old men (and young ladies) It died some weeks ago, I had to push star it while on the road (had to do this 4 times before getting to my destination). Anyway, it first just made a buzzing noise under my seat when I clicked "power!", but now there is no response at all. I can have my lights on, headlights, brake lights ect, just not the engine part. I checked the fuses that I know of (any secret ones?), I also replaced the alternator and the battery too. Any thing I am missing guys? Thank you again! bike is a zzr e7 600 (1999)

It's sad to see that you guys would like us out of the EU, it's mainly due to the tight emissions and protection of forests ect in Europe that EU have. They want to get out of it to make it easier, they say global warming is a lie and they'll scrap all green grants/help that get you solar panels ect. They want to leave the human rights court to that you can't have as much holiday either, and want to scrap higher tax for higher income thus making a base rate that is higher for the lower income people. Not sad sunshine.......patriotic. Hmm I think your taking that the wrong way mate........

It's sad to see that you guys would like us out of the EU, it's mainly due to the tight emissions and protection of forests ect in Europe that EU have. They want to get out of it to make it easier, they say global warming is a lie and they'll scrap all green grants/help that get you solar panels ect. They want to leave the human rights court to that you can't have as much holiday either, and want to scrap higher tax for higher income thus making a base rate that is higher for the lower income people.

Cheers guys for how to do it, I tried the front ones and I was getting tension if I pulled back the brake lever slowly, but I done both sides 3 times and nothing was happening if I pressed it quickly or getting any tension for the brakes I decided to do the brake lines, removed the fluid, changed hoses and put the new fluid in, some weird gunk came out. When I pressed the lever it had pressure till I turn t the nipple then the fluid went through. Worked fine and was done, tested it too. But yeah the fluid wasn't going anywhere on the front, sure I'd get some trickling off the nipple but nothing seemed to suck though :/

I do give up with youtube video links on forum, they so randomly work sometimes Hell yeah green party Just don't vote at all, it's quite amusing that hardly anyone does it anymore, but yet they ignore it because they stay in power this way.

Meh just don't vote. But i'd like if everyone just trolled them and voted green party or something. Least maybe I can have peace from greedy companies but hey ho I like Russell brands revolution ">

Yeah I got some from halfrauds. Let it rest for 24 hours and cracked on yesterday. Took the first nipple off having no idea how much you turn it. Turns out if you take the whole thing out it just pours everywhere!. So after cleaning that up I bled both callipers, which was to the next stage. Taking callipers and old brake lines off, which was the easiest part. Next was putting new callipers on, my first problem was "what way do these go?" I just guessed till the bolts lined up and they seem okay aha. I then put new brake lines in, which I had to take out several times from putting the shorter one on the longer one ect. And also trying to get the banjo bolt at the end perfect and not bent. NOW I tried putting fluid in resivior with one calliper nipple off a bit with the kit on it to drain it through, nothing happens.... the fluid doesn't want to come though the calliper or reservoir. I'm thinking do you need to have the tightness on nipple just a bit or all loose for the fluid to go through? can air be stuck to make the fluid not go through either? It's a 1 way bleeding kit so I don't think i need a jar of fluid at end for reducing bubbles

ok cheers guys, yeah last time I brought it from a shop and with oil filter and that came to 100 quid aha, so I think I'll go on line and try find one under a tenner.. Keep you all updated!

I watched/liked it from 1997 to 2006 when I felt the crowd actually looked interested, and the violence was allowed I look it at now and again when its on sky on the weekend, but other than that, no sorry!

Thanks for reply guys, I got them all off with a help from my uncle (again), what we done was get the screwdriver end parts on my socket with a long bar and worked fine, just hard to turn as it was quite locked. NOW my question is, can I (temp) use my old brake fluid (and the rest left over in the bottle) for the time being? it's still not road worthy, so it will just be going down my road theoretically to make sure the callipers are working fine and then replace the fluid on a later stage for budget reasons.

Ah ok cheers, I'll see who has one and borrow, keep you updated ^^

Hey guys, so I brought some bits n bobs such as calipers and brake lines, rear mudguard, wheel bearings to just make my bike a bit more fresh and better. First thing I wanted to do is strip it down a bit and clean everything, i've got to the fuel tank (1st problem) and the two alan keys near my front forky bit refuse to come out, they are like made of clay. you turn the key a couple of times and just seems to make a nice little circle. My storage isn't hot room so nothing melting. I've put ac spray on it, and tried "light" hammering with a screwdriver to loosen it up. No luck! so running out of ideas how to get that bugger off. Next one is bleeding the calipers, replacing them and putting new hoses on, so I brought a new single person bleeding kit and was about to do it today. Got to the resivour to take top off (watching how to vids), and same problem, it's a phillips screwdriver, 2 screws, both refuse to turn, turn it a bit and metal shards just come out. I feel the guy before me refused to do anything to my bike I guess. So i'd thought i would ask you guys, please bear in mind i'm newbie at doing proper bike stuff like this. (use to spark plugs or changing oil) Thanks :3 Grant!

Its easy fella. Everything only goes in one slot, and one way round.. Do all that, Throw an OS on a hard drive. Sorted , I don't mind clicking stuff in, just the paste on cpu and also the setting up on the set up screen i'd get wrong for mhz and stuff. I'd love you forever!

Without it mine is a peice of shit, but with some mods, it is very nice and good for touring stock brakes suck ect

Oh you build desktops? Buying some items for adesktop, just need to build it!.

The secret treasure we fount in ww2 is at................. -dies- But yes I'm a young chap, I hope I can have reverse age cells and keep at my age of 22, then wait for science to be immortalised. I love to be first to volunteer for immortality, I want to see the world grow from a zone 0 to a zone 1. Joining ranks such as star trek, but getting there has predicted is the hardest part for a race not to self-destruct. If I do be immortal or slowly die but for thousands of years, after we are zone 1, I want to see us find another alien species. How fun that would be. I do predict in this universe we will be one of the young species and be part of the growing empire of races to explore the cosmos. Obviously each time loop of universes being created by science, we were not the first in the universe before. But will be the pioneers in creating the next vortex before the universe self collapses. Thus creating the next big bang. Which has always been sucessful in preserving life forms. Also want a mila kunis clone. And that's how I'll die, thousands of years old, on wikipedia, mila kunis clone's mouth around my c**k and on my bed. Laying there, slowly taking in the last pure breaths, before my heavy eyelids take me to the unknown parellel universe spectrum

No changing riders unless injured this time keep seeing people change to winners!, bloody cheats!

Doesn't myhermes only use independant part time couriers, who just use their own cars after work? Also using other companies delivery drivers aswell. alot can get mixed up