Horseynat30101

Hello, update for you all: Brakes are still in bits an will be until i get back from hold next friday But rung the guys up yesterday about them sending me the wrong fairing and they said ring again today so i have and good news, they will be collecting the old one and bringing on that fits my bike hapy days!!! At no extra cost to me too Very happy with them! And happy that it will all b painted soon

Oops yep pics of course. Im going to the garage tonight so will take loads of pics for you. The only hit i need at the mo are: downpipes and left hand fairing. Needs to be off a H model though. Twin headlight model

Well a little update. Not been upto much as me and sam bag been busy with work and i was at a rally this weekend. Managed to get the pistons out of the front calipers, going to clean them up and get pics tonight. Sadly the fairing i bought is for the L model not my H model so will have to send it back, bought it off egay so dont know how hard its going to be sending it back and getting a refund : the biggest kick in the teeth is im sendig all the fairing to a friend of mine tommorow to be sprayed (he's done it in the past for a living) so think ill get everything sprayed and when i get the left fairing just send it down to him to spray. Ill just have to ride it without fairing for now.... well when its ready anyway! Dont know how long its going to take to source the left side fairing as there are none on egay or anywhere else i can see.... found 2 H models being broken on the internet but as its a bank holiday no one is answering so will have to wait until tommorow

I also have use of one of these two headlight bulbs- £11.98. With card- £2.98

of course i shall get more for you tommorow

Ah right, i will do, whoever painted it red this time round did a good job, its bloody stuck well on there! and its a dark red (almost maroon) that the frame and that it, check the pics

Black fairing, with metallic red frame, swingarm, hangers and stuff Powercoating is a no no, £150 plus VAT for frame, swingarm and wheels. Not too bad but i guess i could DIY.

Right i shall be ringing a few powdercoaters tommorow and get some quotes, anything over £120 and im not bothering. Will be done in the garage. Now what to do about the fairing?

Lol megawatt you can see it the pics, its the browny coloured stuff in the middle of the piston. The rear is the same, we did try to get it out but it seems its meant to be there. Fozzie- i like the idea of powder coating and not bothered about cost but matching the red will be very very hard. Hmmm... maybe i could send the lot? Frame, swingarm, wheels and hangers....... orrrrrrr we could DIY the lot ourselves?

Yeh anything not standard looking is good i like being asked about my bikes, got that alot with my aprillia! Hmm wheels. They're gloss black atm and hadn't thought about painting then as they're in brill condition.... although if bike is going matt then shiney wheels wont work with it??? Megawatt i only just now realised how you meant to get them out lol! The piston is solid as it has this material in it to stop vibration we think so can't get anything "in" the piston.

Matte black it is! Ooooohhhh i love monster!!!! Gunna try find the red monster stickers just little ones, put them just below the indicators

Ill try air first, using the compressor. Got a present today! well not a present but still was excited to see it lol! http://www.imgur.com/3Emmd.jpg http://www.imgur.com/P4f6W.jpg Ta da! Fairing is now complete not bad for £35 including p&p. Will be sanded down like the rest and getting sprayed black. Seriously considering spraying it matte black but not ratty, properly done and keeping the red frame. What do you think?

Ha ha will do!

I need the piston in one piece so wouldn't this destroy them? Also we were thinking of putting the two halves together, reattaching the banjo and squeezing the piston out. But most of the brake fluid is out of the line now so dont know if this would work?

Thanks both of you but magic sam fixed it has removed a bit of thread but not enough to cause a problem. Some numnut must've had the calipers apart before because look! http://www.imgur.com/xLXBU.jpg Some idiot replaced the allen.bolts with a hex one.... god knows how they go it in! Too small space for socket or spanned so sam used an extractor. Got both calipers in half: http://www.imgur.com/davM8.jpg They're in a right sorry state and we need to get the pistons out as i forgot to squeeze them out whilst they were still attached to the lines any ideas??? http://www.imgur.com/NpgJz.jpg

Aww cheers not sure how buggered this one is until sam has a look...... so hopefully i may not require it

Lol eab! Not sure indy, probs full strip and rebuild and paint apart from the engine as that's sweet. Bit of an update: Decided to try and strip one of the front calipers myself...... dont think it was a good idea lmao! Stripped the thread inside where one of the bolts go to hold the two halves together i think tbh it was going to happen regardless who had done it! So will get sam to drill it out and rethread it, and replace the bolt as thats fooked too! I left the other one alone and gave up trying to get the pistons out on the one i partly dismantled as id rather not do more damage. Seriously thinking of paying someone to do it for me haha!!!

Ah we used new brake fluid slid in nice and easy. But if i get some.probs ill know why lol! Oooo headers ey? Ask him how much as mine are blowing and they're literally like hens teeth not wanting to splash out for new ones too :

Wow bex ! Can see the difference in your face there!!!

Red rubber grease. How come? And thanks

Haha ok i do have to drive though i think. Unless i scrounge a lift to work on my mums trike... Hmmm thinking about it ill get drunk, scrounge a lift and go to work hungover lol! Rusty nuts, yup all the ralliews round this way have a strange name lmao!

Whoops sorry : i am using my phone and imgur app so can't adjust the saize sadly

Rallyyyyyyyyy!!!!!!!! Tees Riders- Rusty nuts rally oh and work so its either not drink much or go to work with a hangover???

Helloooo... So here begins the zxr thread. Managed to get a few things done today which included: Removed all the fairing. Bought headlights and went to change the bulb that was blown to find the cap on the bulb wasn't on properly so plugged it in and low and behold headlight bulb wasn't blown. Good job i hadn't spent the tag price of £11.89 for two bulbs!! Sam has a trade card for halFRAUDS and we got them for £2.98 would take them back but going to keep them as spares. Then the fun part Removing all the callipers to refurb them.... first the back caliper, removed it fairly easily and it was in a GRUBBY state... dont think the 20 years had been good to it tbh. Sadly i dont have pics of the outside before we did it but have this. Grubby right? Or is that too clean you think lol! So anyway sam left to take a friend somewhere so i was left to sand them down ready for painting! what a crappy and boring, tedious job lol!!! Anyway some pics: Then we primered them: Then went to the nearest auto shop and bought some gold paint, sadly i think its abit silvery for a gold but nevermind, anything would look better to what it looked like before! Well then i would've fitted the new seals but i got sent the wrong ones so as the old ones were ok we refitted them and put the new pads in old bolts in sadly and didn't get chance to paint them but going to order some stainless ones Final pics of rear caliper: And old vs. new: Hope you've enjoyed reading so far. Hoping to do the fronts tommorow but we will see what happens with sam being at work and i havnt a clue what to do

Should i be worried?