argentum40 Posted June 13, 2011 Posted June 13, 2011 Guys while i was out on the bike in the pouring rain other day water got into the electrics and shorted out the charging circuit... Can you reccommend a good water disperal spray that will also help seal it for future times if i am out in the rain again?.. cheersmick Quote
Guest akey Posted June 13, 2011 Posted June 13, 2011 White lithium grease is the best for long term use mate, get it from any decent motor factor or vehicle electrical suppliers.Quick water dispersal can be done with WD40 or GT85 but i would follow this up with white lithium grease in every plug/socket Quote
argentum40 Posted June 13, 2011 Author Posted June 13, 2011 thanks bud i will use the grease on the multiplugs and get some spray for the actual harness.... is the spray can type lithium grease the same as the tuved stuff mate? Quote
Tango Posted June 13, 2011 Posted June 13, 2011 ACF50 is a good spray for protecting your electrics and metal work too.Bob Quote
Stu Posted June 13, 2011 Posted June 13, 2011 i got 3 tubes of electrical grease off ebay for less then £4 delivered if you can pull the connectors apart and clean the contacts first too i pulled all the pins out on mine cleaned them up and put them all back greased up Quote
Danny-B- Posted June 14, 2011 Posted June 14, 2011 Just slap some vasaline on it If you have any that is ..... Quote
argentum40 Posted June 15, 2011 Author Posted June 15, 2011 i got some contact cleaner so will use that first which kinda disolves the green crud.. then grease the mother up Quote
Stu Posted June 15, 2011 Posted June 15, 2011 wise choice its good stuff just dont forget to grease them or something check the connections too as some can work loose and not connect properly Quote
argentum40 Posted June 15, 2011 Author Posted June 15, 2011 will do matey cheers... just waiting for the stuff to arrive Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.