Tuckermoto Posted May 6, 2019 Posted May 6, 2019 Hi I’ve just ground ( lapped ) my valves seats and I’m going to replace the valve stem seals ..can anyone tell me if the Athena valve stem seals are ok ..present bike is. Honda Cbf 125 with 26000 miles on it ..piston / barrel / rings have been renewed at the same time Quote
Smithers Posted May 6, 2019 Posted May 6, 2019 Don't know about the valve stem seals but the 26K for a 125 is impressive. Quote
fastbob Posted May 6, 2019 Posted May 6, 2019 Athena is an established make and they ain't Chinese as far as I know so yes , I'd use them . Quote
Mr Fro Posted May 6, 2019 Posted May 6, 2019 I used a full set of Athena gaskets/seals on my turbo build. Everything fit well and seemed good quality. Quote
Tuckermoto Posted May 6, 2019 Author Posted May 6, 2019 That will do me thank you everyone for your feed back I shall order a set now Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.