Joeman Posted March 2, 2017 Posted March 2, 2017 In an effort to clean up my dodgy wiring, I decided to build a power distribution box.So tonight I powered up the soldering iron and built this! It a box that's wired to the battery and a switched live such as the numberplate light. It contains a relay to keep the switched power separate from the load.It also has an LED battery monitor that can dangle outside the bike to give a visual indication of battery status. Waiting for some three way plugs to arrive so I can have one plug that's for both a permanent and switch live. Quote
Stu Posted March 2, 2017 Posted March 2, 2017 Looking good Joe I just got one of these instead https://themotorbikeforum.co.uk/viewtopic.php?f=83&t=59453 Quote
Mr Fro Posted March 2, 2017 Posted March 2, 2017 Looks handy Joeman, I like the snazzy connectors! Quote
Joeman Posted March 2, 2017 Author Posted March 2, 2017 Cheers. Only need it for three devices, USB charger, GPS tracker and powercommander autotune. It's small enough to fit under the seat with the battery - not much free space on my bike!Also the LED battery monitor doubles up as a charge port for the maintenance charger, so now I only need this one device connected to the battery which will clean up the wiring loads. Quote
Joeman Posted March 2, 2017 Author Posted March 2, 2017 Looking good Joe I just got one of these instead https://themotorbikeforum.co.uk/viewtopic.php?f=83&t=59453I just ordered one out of curiosity. Put in the comments section to send the commission your way Quote
Joeman Posted March 11, 2017 Author Posted March 11, 2017 My Cosmo box just arrived. Quite a bit bigger than mine so not sure I have space on the bike to install it with the supplied case.. Quote
Stu Posted March 11, 2017 Posted March 11, 2017 Yeah one thing I noticed was the size of the box! Although I have the space It could be made smaller Quote
ThePhatomfart Posted March 11, 2017 Posted March 11, 2017 How about this https://motogadget.com/shop/en/m-unit-digit-tastersteuerung-u-sicherung.html Quote
JRH Posted March 11, 2017 Posted March 11, 2017 How about this https://motogadget.com/shop/en/m-unit-digit-tastersteuerung-u-sicherung.htmlHow much Quote
Joeman Posted March 11, 2017 Author Posted March 11, 2017 Is there really a market for them at that price?? I'm going to make a few more and sell them for silly money... This time next year Rodney, we'll be millionaires!! Quote
Stu Posted March 11, 2017 Posted March 11, 2017 How about this https://motogadget.com/shop/en/m-unit-digit-tastersteuerung-u-sicherung.htmlHow much I think the answer is too effing much Quote
Stu Posted March 11, 2017 Posted March 11, 2017 Is there really a market for them at that price?? I'm going to make a few more and sell them for silly money... This time next year Rodney, we'll be millionaires!! People do buy them and rant and rave how great they are and these are the only ones to buy! Usually people with more money than sense and BMW owners..........err what bike you got again Quote
Joeman Posted March 11, 2017 Author Posted March 11, 2017 Mine is home made and cost about 5quid in components!! Lol Quote
Joeman Posted March 11, 2017 Author Posted March 11, 2017 Ok, in the garage about the have a play with my new Cosmo relay board.... Spot the problem...The connector block has been soldered on the wrong way round!! Quote
Joeman Posted March 13, 2017 Author Posted March 13, 2017 Email from Cosmo today, they are sending me a new one. Quote
Joeman Posted March 21, 2017 Author Posted March 21, 2017 New one arrived. Planning to unsolder the terminals from the bad one and flip them around to make it usable.Then I'll have two working Cosmo power supplies.. does anyone want one?? "I do you good price" haha Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.