sam64 Posted July 1, 2011 Posted July 1, 2011 hi guys just got me new exhaust well its second hand but new to me. needs some TLC going to paint it can anyone give me some tips ECT. cheers steve Quote
megawatt Posted July 1, 2011 Posted July 1, 2011 Can you post some pix of it up mate, I might be able to help??? Quote
Stu Posted July 1, 2011 Posted July 1, 2011 whats it made out of is it just the end can or down pipes? Quote
sam64 Posted July 1, 2011 Author Posted July 1, 2011 just standard downpipes not stainless going to clean them up their in good nik going to spray them black do i need some sort of under coat first Quote
Tango Posted July 1, 2011 Posted July 1, 2011 You will need exhaust paint.....high temp! It doesn't normally have a undercoat. Quote
megawatt Posted July 1, 2011 Posted July 1, 2011 If you're sure that's what you want, you should rough up the stainless first so the paint sticks to it. Quote
Stu Posted July 1, 2011 Posted July 1, 2011 they arent stainless mega yeah you will have to clean them up really well and use a exhaust or BBQ paint Quote
Lumor_uk Posted July 2, 2011 Posted July 2, 2011 was thinking about this, would fire surround paint do? got some left over you see. Quote
Stu Posted July 2, 2011 Posted July 2, 2011 you can try it depends how heat resistant it is really Quote
mealexme Posted July 2, 2011 Posted July 2, 2011 was thinking about this, would fire surround paint do? got some left over you see.there is only one way to find out... if it starts to flake off after a bit, i would say no Quote
Danny-B- Posted July 3, 2011 Posted July 3, 2011 You need the VHT paint they sell in halfords etc gotta be rated to 400deg or summat Quote
Colin the Bear Posted July 3, 2011 Posted July 3, 2011 VHT Very high temperature. Now if that was "It does what it says on the tin" stuff you should be able to ride the bike through a star. Quote
Bogof Posted July 3, 2011 Posted July 3, 2011 VHT Very high temperature. Now if that was "It does what it says on the tin" stuff you should be able to ride the bike through a star. Don't use a synthetic brush, it'll melt in the tin. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.