Bogtom Posted September 21, 2018 Posted September 21, 2018 Hello!I am currently trying to get my girlfriends 2006 cg125 started so I can take it for a MOTIts been stood for over a yearReplaced batteryTurn the ignition on and everything works on left handlebar control.. headlights, horn, indicatorRear brake switch works tooHowever the right hand side handlebar control nothing works.. starter and front brake light switch. Push starter motor and nothing happens.. no relay click or fuel pump noises.Any thoughts on solution?Thanks Quote
Guest Posted September 23, 2018 Posted September 23, 2018 Trace wiring back from switch block. Check inline connectors. Is there a common earth that could be compromised? Have you looked under the tank? Where was the bike stored? Any possibility of rodent damage? Quote
Guest Posted May 10, 2020 Posted May 10, 2020 i used bicycle pump and pumped air into end of pipe connected to base of carb float bowl. engine cold and choke on (fuel tap on and gear in neutral with ignition on) and it started. its a 2006 model Quote
Tiggie Posted May 10, 2020 Posted May 10, 2020 You could at least leave some money on the dresser Quote
Stu Posted May 10, 2020 Posted May 10, 2020 You could at least leave some money on the dresser Maybe he realised he was talking shite Quote
RantMachine Posted May 16, 2020 Posted May 16, 2020 The incredibly brief return of paulggriffiths? Quote
WD-40 Posted May 16, 2020 Posted May 16, 2020 I'd check the connector and wiring going to the right handlebar for an open. It could also be corrosion in the switches but the front brake light switch is usually separate from the other switches and it's not working either. It's possible they all have corrosion but it's more likely there's an open in the wiring going to the right handlebar Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.