Passenger foot pegs

[Trentskywalker]

Hi Guys,

Just after some advice, I own a Triumph Dayton 675 07 plate.

I want to remove the the passenger foot pegs and want to know if I have to put blanking plates on or can just have nothing?

Thanks

[megawatt]

If you want to get it through an mot. You may need to remove pillion seat and put a cover on. Remove brackets as well.

[TimR]

google sato hooks and then get the cheapy version just in case you ever need to recover bike but yes you will need to replace seat with a cowl .

[Tiggie]

what [mention]megawatt[/mention] said. I had it the other way round and had removed my seat and left the pegs. Tester said If the seat wasn't there it couldn't have pegs on.

[Trentskywalker]

If you want to get it through an mot. You may need to remove pillion seat and put a cover on. Remove brackets as well.

 

I was told that it can pass the MOT with output a seat cowl and foot pegs removed. Is what you say 100%?

[Stu]

If you want to get it through an mot. You may need to remove pillion seat and put a cover on. Remove brackets as well.

 

I was told that it can pass the MOT with output a seat cowl and foot pegs removed. Is what you say 100%?

 

I don't know anyone who has had an issue so probably best to check with your MOT tester

[megawatt]

Could be one of those things when it's up to the tester, but yes I have spoken to someone who just took the pegs off, left brackets and seat on and failed mot.