WR125X Plastics

[NiXER]

Apologies if this has been asked before however I have trawled the forums and other sources and just can't seem to find an answer regarding this.

I'm using my brothers WR125 (2016) as he has moved to NZ. He has come off it a few times and a lot of the plastics are cracked. I'd like to get some new plastics for it but I can't find any kits that specifically state they are for a WR125.

Are there kits for this bike? Would a YZ/WRF kit fit it?

Any help would be much appreciated.

[Tiggie]

What has broken? Quite a few different fairings for it available on eBay

[geofferz]

 

?

[NiXER]

Apparently I don't have permission to view files attached to the post :/

Essentially the tail, left rear side and left front side are cracked.

The original Yamaha pieces seem to be around £60 to £80 each! Whereas the full aftermarket kits seem to be around the £70 mark for a full new set of plastics.

Don't know whether there's any kits you can put straight on to get a whole new fresh look or just pay that little bit extra and only replace the exact panels that are broken.

Thanks for the replies so far

[geofferz]

Was just a screenshot of an ebay search for 'WR125 fairings' top results - seemed plenty there.https://www.ebay.co.uk/sch/i.html?_nkw=WR125+fairing&_trksid=p2535124.m4084.l1313.TR2.TRC1.A0.H0.XWR125+fairing.TRS0

Or Google brings this up https://www.greenlandmx.co.uk/en/acerbis-yamaha-yz%2Fwr-125%2F250-15-19-plastic-kit-black/0023086.090.html?gclid=CjwKCAjw5vz2BRAtEiwAbcVILxHnJoIWqciIS7oUrtMj9X6OlNj2eA-5SbMGd46DXvN4a5DXuibylxoCgD4QAvD_BwE

[Stu]

Apparently I don't have permission to view files attached to the post :/

 

You will have if you're logged in

[Tiggie]

[mention]Stu[/mention] Can't new members see photos on posts?

[Stu]

@Stu Can't new members see photos on posts?

 

All new members need to make one post to see pics

You also have to be logged in to see them too

[NiXER]

Thanks for the links. I've seen those or similar style plastics but I can't see how they would fit on this bike so it makes me dubious that they are correct.

Apologies if I'm being ignorant I've not done a lot of work on bikes before, just starting out.

WR125X

[WD-40]

Is that it? https://acerbisb2b.co.uk/bikes/yamaha/wr-125-2t/2016.html

The plastics that you've got look pretty good to me! The OEM fairings are usually better quality than the aftermarket ones

[NiXER]

I don't think those will fit, fuel tank covers / scoops look like the wrong shape.

That side was better to show the shape of the plastics. It's the other side that's a bit cracked and split.

I found all the genuine parts online but it comes to £280 to replace all the cracked pieces. Seems a lot for just plastics!