newbiker90 Posted December 28, 2018 Posted December 28, 2018 can easily be repaired, something does not add up here Quote
fastbob Posted December 28, 2018 Posted December 28, 2018 I think I get it now , this distortion was caused by forces from the forks and head stock that should have been bolted to the top of the engine but were free to pivot on this point instead. Considering the amount of leverage this would generate I'm starting to understand how the cracking might have occured. So if that's the case , do the holes in the frame and the engine at the upper front mounting point still line up ? I'd be surprised if they do . Quote
TimR Posted December 28, 2018 Posted December 28, 2018 engines now make up part of the chassis so if not tight in there it allows the frame to flex . Quote
Stu Posted December 28, 2018 Posted December 28, 2018 engines now make up part of the chassis so if not tight in there it allows the frame to flex . If they didn't flex the frame would crack! Quote
fastbob Posted December 28, 2018 Posted December 28, 2018 engines now make up part of the chassis so if not tight in there it allows the frame to flex . If they didn't flex the frame would crack! Engines making up part of the chassis is not entirely a new idea. Quote
Stu Posted December 28, 2018 Posted December 28, 2018 engines now make up part of the chassis so if not tight in there it allows the frame to flex . If they didn't flex the frame would crack! Engines making up part of the chassis is not entirely a new idea. I never said they didn't! But if you have no flex in the frame at all then it would crack! Looking at the size of that frame I don't think the engine forms part of the frame! Not like some bikes that have a front and rear frame and nothing in the middle! Quote
fastbob Posted December 28, 2018 Posted December 28, 2018 If they didn't flex the frame would crack! Engines making up part of the chassis is not entirely a new idea. I never said they didn't! But if you have no flex in the frame at all then it would crack! Looking at the size of that frame I don't think the engine forms part of the frame! Not like some bikes that have a front and rear frame and nothing in the middle! Quote
Stu Posted December 28, 2018 Posted December 28, 2018 Engines making up part of the chassis is not entirely a new idea. I never said they didn't! But if you have no flex in the frame at all then it would crack! Looking at the size of that frame I don't think the engine forms part of the frame! Not like some bikes that have a front and rear frame and nothing in the middle! But that's not a kwack 650 Quote
fastbob Posted December 28, 2018 Posted December 28, 2018 engines now make up part of the chassis so if not tight in there it allows the frame to flex . Sorry, wires got crossed a bit , I was merely highlighting a point of interest about engines as stressed members not being exclusively a characteristic of bikes " Now " Even the humble CG engine forms part of the bikes frame . A case of double quoting. Quote
oldgrump Posted December 28, 2018 Posted December 28, 2018 I think I get it now , this distortion was caused by forces from the forks and head stock that should have been bolted to the top of the engine but were free to pivot on this point instead. Considering the amount of leverage this would generate I'm starting to understand how the cracking might have occured. So if that's the case , do the holes in the frame and the engine at the upper front mounting point still line up ? I'd be surprised if they do . Hi as [mention]fastbob[/mention] has said, the engine hasn't dropped because the two rear bolts are still intact, and also look at the rear of exhaust pipe, if the engine had dropped the tail piece would be on the swingarm.As Bob has said the Frame has moved upwards without the front engine bolts being in place, in fact I would say he's a lucky guy that it hasn't snapped.And if you were going to try and repair you would need to take it to a frame straighter, they can normally jig it back in line, had a Yamaha Thundercat done once when I flipped doing a Stoppie!!! and bent the tail section. The price of a new frame direct from Kawasaki Dealer is £1252.21. Quote
Bhawk Posted January 2, 2019 Posted January 2, 2019 Can you not get a replacement frame from a bike breaker, might be worth looking into....so long as its not damaged. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.