Albrynmair Posted January 24, 2022 Posted January 24, 2022 I accidentally dropped my bike and it looks like the Pannier Rack has bent, any suggestions how i bend it back? I have a Triumph Tiger 800 and am unable to locate replacement pannier rack, it looks like the part is discontinued, so I think I need to try and bend the original bar back into place. Thanks Quote
husoi Posted January 24, 2022 Posted January 24, 2022 I would take it out. Use a small torch to heat it up and then gently bent it back to original shape. If you take the other side out it should be similar shape but mirrored. Quote
MikeHorton Posted January 24, 2022 Posted January 24, 2022 I'd maybe take it off along with the other side and compare all the angles and gently straighten maybe with the use of a mallet and wood heat up where needed Quote
Albrynmair Posted January 24, 2022 Author Posted January 24, 2022 Hi, Thanks for the suggestions, only problem I have is that the right hand rail goes around the exhaust, so it is a different shape. Quote
KiwiBob Posted January 24, 2022 Posted January 24, 2022 (edited) Be careful, it's quite flimsy as its made of thin tube steel not not solid bar. There's a Triumph Tiger group on facebook that may be able to offer some advice on repair/replacement. Edited January 24, 2022 by KiwiBob Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.