Overstrider Posted September 7, 2023 Posted September 7, 2023 Hi. I'm looking for an headset primarily for sat nav instruction but want it to also connect to group rides. I'm using the Neotec 2 helmet which can have the Sena SRL integrated. Question is would you go for the SRL or go for an alternate which can be used with other helmets down the line? Recommendations would be welcome as well please. Thanks Quote
RideWithStyles Posted September 7, 2023 Posted September 7, 2023 Depends on when your helmet is needing replacement and will you go for the same one again? the thing with Sena that i nevef understand is they are only water resistant and not water proof so there is always a potential problem and you cant claim warranty for that. cardo are a good alternative, certain models can mesh like sena, actually water proof , most use jbl speakers which are good and is generally cheap to buy too depending on where you are. Quote
Steve_M Posted September 8, 2023 Posted September 8, 2023 (edited) I have the SRL, and my pillion has the SMH.I don’t have time to detail the issues (currently touring) but I wouldn’t buy them again. Our previous (Cardo) headsets were much better. Briefly, Pairing is unreliable, particularly with the Motorrad Navigators. constant sounds (wind noise) from the other set, the SRL randomly asks for me to “say a command”, battery life is poor (always transmitting). Edited September 8, 2023 by Steve_M Quote
Capt Sisko Posted September 12, 2023 Posted September 12, 2023 I have a Sena 50R clipped to the side of my Neotec 2 after previously having it clipped to the side a BMW System Helmet. It's been drowned in monsoon style rain, baked in the blazing sun, rolled around the floor and generally used rather than cared for. It's worked perfectly. In truth it's a bit over spec'd for what I use it for and I only use a fraction of it's features, but I just switch it on, it pairs automatically to the phone & the sat nav and off you go Quote
bonio Posted September 13, 2023 Posted September 13, 2023 One issue with the Neotec, IIRC, is finding a suitable position to mount a comms system. The most natural place is already taken up by the integrated SRL controls. Quote
Stu Posted September 14, 2023 Posted September 14, 2023 You need something like this https://www.printables.com/model/204285-cardo-packtalk-edge-mount-for-shoei-helmets-compat Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.