JRH
-
Posts
3,209 -
Joined
-
Last visited
-
Days Won
22
Content Type
Profiles
Forums
Events
Store
Gallery
Community Map
Everything posted by JRH
-
Thanks for that ! Your welcome. You would think that the washers are all installed the same way though.
-
Same place as last time. You suggested 11:00 for the last cancelled run, shall we stick with that?
-
Just to confuse even more, the GSF1250 wave washer is the other way round
-
What was your emergency stop speed?
JRH replied to TunnelEyes's topic in CBT, Test and Advanced Training Information
Lets face it. The metric system was invented for people who can not multiply and divide in anything but base 10 numbers. while I'm at it lets bring back The farthing HalfPenny and groat. ( Don't remember the groat) . -
CBT - Experiences of other Members
JRH replied to slanty's topic in CBT, Test and Advanced Training Information
well done -
According to the BBC weather Friday is fine. So all being well I'm on for a ride out.
-
Re- connect the fuel pipe, turn the fuel tap on then open the carb drain screw and then check the fuel flow through the system. If no fuel flows out through the drain then either the tap is faulty or the carb inlet is blocked.
-
Yep, use YouTube and then add link.
-
*cough*wuss*cough*
-
Glad to see your sense of humour is still intact. I've still got an old style arc welder, can't get on with the mig, probably need more practice. Can never get the feed speed right.
-
What are your thoughts for Friday, weather does not sound too promising. I will have a look at the forecast but if it's gonna be wet then think will scrub. Just seen the local forecast for Friday. not good, rain most of the day so I think we should give it a miss.
-
As above fan should rotate easily. Re the temp gauge, probably wont move too much. My GPX would get just out of the cold box on most runs. Would only move half way up the gauge in the summer. On hot days in traffic would approach the hot zone and the fan would kick in and keep it at half wayish.
-
What are your thoughts for Friday, weather does not sound too promising.
-
I don't have any loose bolts , well I hope not ! If you mean what bike is it , its my 93 Gixer 1100 . Zoom in on picture on top of swingarm Well spotted
-
The H4 base plate should ensure it goes into the housing the correct way.
-
It's the fixed or stationary part of the alternator. Which generates the electricity and charges the battery.
-
Assuming they are for the GSF600 see here at wemoto http://www.wemoto.com/bikes/suzuki/gsf_600_w_x_bandit/98-99/
-
Let you know nearer the time.
-
The intrepid bunch ready to set off. Sorry [mention]Liveware Problem[/mention] you can still see some dirt.
-
Garmin Zumo cradle modification: Part I
JRH replied to MarkW's topic in Clothing, Luggage, Accessories and Security
USB port Stereo audio out Stereo audio in Microphone in And power See here http://static.garmin.com/pumac/zumo_590_Wiring_Specs_EN.pdf -
Thanks to [mention]Tango[/mention] for organising the meet. Was good to meet up with some new and some familiar faces. Run out was good, grey but dry. Few spits of rain on the way back. Then 5 min after getting home, heavy rain. So all in all a good run out.
-
I might be able to juggle the meeting Can't do the 20th, funeral to go to.
-
Can only do Friday, unfortunately.
-
Hi [mention]Igloo[/mention] sorry to hear about your aunties accident, and glad she is ok. Keep watching the thread for the next run out.
-
Was good to meet up with you [mention]Speedy23[/mention] and put a face to the name. Enjoyed the run out and food stop at Wellesbourne. Look forward to the next one.
