-
Posts
22,596 -
Joined
-
Last visited
-
Days Won
138
Content Type
Profiles
Forums
Events
Store
Gallery
Community Map
Everything posted by Stu
-
so thats y ure bike never works and who has been telling you porkies ? its been off the road twice in 2 years
-
you can yes but what you have to think about is if you ever need to remove the indicators or undo the wiring for any reason you would have to cut the wire and re solder them
-
Matlock Bath Illuminations/Fireworks Sat 25 October
Stu replied to a topic in Ride Reports and Pictures
whaaaahooooo my long weekend off night just for now -
hot water and wipe it off with a rag too never had any problems doing this i have been known to even pour boiling water on the tyre while i turn the wheel at the same time the heat isnt on long enough to damage the tyre but enough to remove the oil
-
Argos........ £20 gets you a reversable electric impact gun which hooks up to your battery and is good enough for the job
-
true , but lots of parts of a full engine build require gasket paste, such as gsxr crankcase halves yeah i know but a lot of people dont know how to apply it propperly they just think the more the better and usually its a proper sealant rather then just any old crap out of halfrauds im sure you will know where im coming from
-
vicki has spare tents at the bank hol weekend it rained every night and that never spoilt the fun you will only be sleeping in your tent the rest of the day/night you will be indoors or under cover of some sort could try this place but i think there will be a limit on what time you stroll in its only 2.7 miles from vicki's http://www.wheresbest.co.uk/venue/65354 ... est-House/ bike would be safer at vicki's behind the locked drive gates
-
leave bike at vicks i will have a quick search to see if there is anything closer i would just camp it will be ok
-
its in walking distance if you are preppared to walk on dodgy back roads for about 5 miles short trip in taxi will see ya there
-
if it is electric then it should be on the front sprocket cover check to make sure its secure and also check that the connectores are clean and dry mine got water in before and was under reading then over reading then just stopped hope that helps
-
get a propper gasket dont use paste/sealant as some can be squeesed inside the engine and break off into the oil and clog up oil filters and oil ways causing massive damage
-
i think the drive is on the front wheel on the zx9 and it sounds like you have a worn drive
-
no worries to be fair it isnt anywhere on the forum so you wasn't to know
-
please dont post torrent sites its against the hosting accounts rules
-
sounds like it missing on one of the cylinders check all plug connections also has it started using water or oil at all ? ps nice chavy door speakers
-
all sounds good but do you think willow will be happy with no more flames ? can the air box be opened up on the gsxr mark ? just thinking it might be worth doing it before the dyno set up
-
RST are made in the same factory too ive had RST and they are good can get them for £270 at the min
-
good point now how much fuel will that take in my car 230 mile round trip = £50 in my car so would have to include that in the price too plus tickets to get in if you have to pay could work out more expensive
-
frank thomas these have been bac for repairs a few times but have been ok for the past year this is another reason im thinking of spending £500 on another set of leathers rather then £80 for new panels on current ones
-
more then good enough for the road and his riding
-
Renthal Sprockets and Tsubaki X Ring £ 93.79
-
the seat lock only has a few tumlers in it which the first part of the key will fit a if you have half the key a good locksmith can make the first part from the seat barrel and the rest from the other half key but that still leaves you with the stuck key in the ignition
-
yes you are you will find that a small company will make better leathers then the big ones as they have a reputation to keep but their prices arent as competative their is a fine line between safety and compatition and the big boys will always find that line
-
yeah i will be getting them done at unique leathers here in hull and their work is good i have had things done by them before to be honest i didnt try the arlen ness ones on as they didnt have my size in stock