Bender

Looks like it comes down to if you will feel comfortable or if it will always be nagging at you every time you pick it up to put it on, always there that thought of impending doom, fear and dread pulling at your subconscious, a small voice whispering in your ear, the small niggle that you just cant see out the corner of your visor. Probably be all right though, maybe I think I would replace it but that would just be my own preference.

It is and you can blame the eu for it [mention]Rodders[/mention] Well done on the pass and good luck with round 2, i found mod 2 much more relaxing hope it all goes well.

I want a re vote i didnt red before clicking

Perhaps Barry Scott could do a better job . I can see the add now Seal it bang

Sounds bloody great, be good to see the progress and the pics from it.

Just noticed this thread, landrovers suck up money better than a Henry. Have had landys in the family for as long as i can remember, have a 90 thats been with us since 1989, my dad who is 86 is currently rebuilding it, new chassis bulkhead etc etc, richards chassis didn't go well, they welded a bracket on the wrong way round, unfortunately my dad worked from the rear to the front, it was the steering damper, he had a full rolling chassis, they wouldn't cover the warranty if he cut it off and re welded it so he had to strip it and they sent another. Also have a disco 2 that i weld every other week.

There is a very recent thread on here regards this subject. Think end result was it's the work of the devil and your bike will explode if you use it, or something like that.

I will say it was you for £700.00 Good luck sorting your Bro out.

125 practice won't do you any harm, I couldn't tell you how many u turns I did on mine, are you OK with everything.

Yup a fail is not the end of the world its just more practice.

Stay relaxed if you tense up you will make the problem worse. Are you slowing down too much before you stop, if you loose all your speed then expect the bike to roll the last 10ft very slowly with no drive its not going to like it, confidence can make a big difference. Do you have your own bike?

It's 4.1 amp v 5.8 amp Your cable and switch would have to be pretty poor not to cope, but if it catches fire I never seen this and don't know who you are.

Holy thread resurrection batman.

It's all good practice, not sure about the instructor hitting you no matter how slow that's lack of awareness and anticipation, they should be teaching you that lol. Know what your issues are and work on them.

Buy a new helmet as you don't want to be risking your head and everything else buy second hand if your budget restricted. My gloves and lid would be well over your budget.

[mention]Mr Fro[/mention] Ohh personal insults Girl guides also disassociated them selves from it there are so many who have done that i couldn't even be bothered to continue , no doubt they are all anti everything, a question was asked when google gives lots of answers and an answer was given that someone obviously didn't like. To be honest any group that is going to use other peoples charity to push there own view of religion i would not be supporting.

Well done and good luck

Why? http://www.secularism.org.uk/opinion/2016/10/advice-for-parents-wanting-to-give-the-evangelical-operation-christmas-child-shoebox-scheme-a-wide-berth Going off google they are bible bashing bigoted religious nutters. http://emilyjoypoetry.com/7-reasons-not-to-participate-in-operation-christmas-child-this-year

Dropped it 4 times and come off more than once in 6k miles, don't you think you may need to work on your riding and keeping the bike upright rather than keeping it clean, keep on at that rate it wont be worth washing if you have fingers left.

Looks good. I'm sure some one will have a map to calm down the below 4k issues or you could do it yourself if your not too lazy

He has width issues lol, with the space available that is.

In the pursuit of cheapness and easiness just make a lean too shed have one end open up fully so you can ride/ paddle it in, have another door on the side you can open to get on/off the bike, security is never going to be a strong point on the side of the house but you can run a camera or a wire to your house alarm on the tamper circuit so it will go off anytime it is opened, have a switch so you can close the circuit to disarm the tamper to the shed. If you wanted to make it easier to get out you could have the other end hinged and you could drive it straight out. your already going to have to make the shed you just need some more hinges and locks, you could lock the end ones from inside with bolts or locks and just have the side one with the exterior lock, if you can conceal the hinges it would look like a lean to shed with a side door.

well done, take note of the forward planning and stay safe

Be careful you may get that and a massive waitress.

https://www.amazon.co.uk/Spectra-3272-Outdoor-Gate-Closer/dp/B007OSRPI6 gate closer http://www.ironmongeryonline.com/150mm-traditional-cabin-hook?utm_source=adrac&utm_medium=shopping&imt=1&gclid=Cj0KCQjwprbPBRCHARIsAF_7gDYqRV_UehAskuHtnLSWn2reVGgtugf0-Nf-eHm6hIcUhWPf6wwhurUaAkI6EALw_wcB&utm_campaign=shopping&utm_source=adrac&utm_medium=cpc&utm_content= gate holder opener