Jump to content

Stu

Administrators
  • Posts

    22,571
  • Joined

  • Last visited

  • Days Won

    138

Everything posted by Stu

  1. have you had the cables off? if the return cable is too tight it will cause a throttle to stick i know ive done it check adjustments, routing and lube all moving parts
  2. Stu

    brake binding

    Have you cleaned up behind the seals? A common problem is a build up behind the seal and causes the seals to grip the piston's
  3. im working and cant swap either!! bit gutted to be honest
  4. Bikes don't have a front plate. no but they can write your plate down as you go past as it videos you too!!
  5. here if you have a cough http://1.bp.blogspot.com/_xEufvlY8pSA/SwRiSVCBB0I/AAAAAAAAAQA/SSWXbOwp8co/s1600/covonia_Bull_1%5B1%5D.JPG
  6. or a head gasket gone between an oil way or valve stem oil seals theres quite a bit on the list! get some tools remove plug and give it a good clean up if its wet let it dry out or replace for peace of mind how longs it been stood? if the plug is dry the carb could be gummed up and need a clean
  7. Stu

    Investments

    INVEST sod that spend it you might get ran over by a bus tomorrow ive seen the way they drive!!!
  8. No! thats one thing we dont want on here to be honest cant be arsed with forum wars there is other ways though
  9. seen as though you are 21 and can do DAS and ride any bike i would get a second hand 600 ish cc of some sort you will get bored of the 250 very quick and its a lot of money for a first bike you can pick up a decent 600 for around 1-1.5k and have a lot more fun and not get bored of it something like a fazer, hornet or bandit check out the bikes and the insurance too
  10. ive had 3 points and a £60 fine for going fast and we shall leave it at that! i learnt my lesson...... ......keep an eye open
  11. thanks for the kind words guys it means a lot
  12. sounds like you have a short somewhere a trapped wire on the starter relay or something have a good look around where you have been working
  13. i dropped mine against the side of vicki's house the first time i met her
  14. Don't even use soap! It's full of salt Get on ebay or amazon and order a few tins of chain cleaner its delivered to your door so you don't have to go to shops for it
  15. Don't forget the master cylinder too no point doing the calipers if you don't have enough fluid going to them
  16. Happy birthday sue have a good day
  17. no money but a big arse lens
  18. bloody hell that new lens is good for your camera didnt think you would get that shot from home! ps have fun
  19. i cant wait to see the finished bike do you fancy doing a guide in the "Guides, Manuals, & Riding Advice" section on how to spray panels as it gets asked a bit and by the looks of things you know what your on about
  20. take a look at your wiring in the junction box make a note of all the wires and where they go and what they are for soon figure it out
  21. also is it a 2 channel or 1 channel is it just a room stat or a room stat and programmer for the hot water too
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Please Sign In or Sign Up