JRH

Looks good Need to get my RC stuff out again.

Well done. I still occasionally forget the indicators and I don't want to think how long I have been riding.

Well done

Used to have something like this. Should get a new one.

With Mr Fro on that. How much drag is that going to add to the hemet. Will the suckers keep it attached? But like the idea of a wiped visor.

How is the jacket these cold mornings. ( should have gone for the Merlin with pink trim)

But if there is no road tax on the vehicle there needs to be insurance on the vehicle in order to get the road tax. When I have bought cars or bikes from a dealer, road tax was always required hence the need for an insurance cover note in the old days. Now with everything on line, when I bought the last bike, phoned insurance with date of pickup, went to dealer and taxed it at the dealership all online. The MOT was part of the deal.

As TC says. No dealer will let you drive away unless tax and insurance ( MOT where necessary) is in place and valid.

That stinks Fro. As a minimum they should cover the costs. Lots of companies have clauses that make it hard for employees to patent something that benefits the companies products, but not to reward innovation is not on.

Congrats on the pass Mikedz and as Joeman said if thinks don't go to plan and you do not panic if goes in you favour. So well done ( bet you were glad the island of doom wasn't on the route though).

No probs. let us know how it goes.

This any good. http://www.ebay.co.uk/sch/sis.html?_nkw ... 7675.m4096

Don't you start!! Annoyingly as my rear wheel was off to fix a puncture I have to adjust teh chain AGAIN!! arghghghghghgh You meant they did not adjust it on refitting after the repair.

Right, the sender is a coil of wire on a former and this is connected to one of the wires. The floaty bit is a wiper that rub up and down the coil(quick nurse the screens). The other wire is connected to this wiper. So as the wiper moves up and down the resistance changes. It is possible that some muck or something has got Into that area and sat the wiper moves it is touching different areas. Hope that makes spence, it does in my head. So it may be possible to clean the wiped area of the coil and hopefully restore the operation. If if don't you haven't lost anything by trying. Unless any one else has ideas.

Infinity motorcycles at hanger lane, think they have other branches in London, never been in but pass it visiting daughter. Bought stuff from them but at shows. Otherwise trust to google.

Just say you need to pop out for a couple of hours and accidentally end up at he bike show.

I think there are 3 wires on the back of the gauge, brown + , Black/ yell - , and yellow/white to the float. Through the float to the (-) Link yel/white gauge read full. Disconnect link gauge read empty. Do not link wires for long. HTH. If you do not have a manual there are several on internet to down load.

It sounds like the float isn't floating. Can you take the float unit out again, I know you have 10ltr of fuel int there. Then if possible lower the float unit into some liquid and check that it does actually float and move the sender arm. Otherwise is there anything in the tank that is stopping the float from moving, annoying bit of pet seal?

Have a look at this thread. viewtopic.php?f=3&t=59327#p918373

Bugger. Know any one who has?

If you have a multimeter, set it to resistance and disconnect the float switch. Then measure the resistance of the float switch, move the float and check the resistance changes. This will tell if the float assembly is working. If ok then check the rest of the wiring back to the gauge. HTH.

Some bikes have REAL gauges.

Gsf600 manual says they are LEDs.

Will there be hot ladies?? I seem to remember one of the insurance/legal companies having hot ladies handing out goody bags. That may be Carol Nash May see you Sunday TC.

Thinking about it, yes it did hurt, my GPX had a "bolt" in a similar place an it was for an oil pressure guage take of point but it was above sump level.