Bender Posted October 21, 2022 Posted October 21, 2022 2 hours ago, billy sugger said: Mrs Miggins from Black Adder With Baldrick as chancellor and lieutenant George as defence Secretary 1 1 Quote
Six30 Posted October 21, 2022 Posted October 21, 2022 Penny Mordaunt.... even if she is crap at the job, at least she's ok to look at 3 Quote
billy sugger Posted October 21, 2022 Posted October 21, 2022 4 hours ago, Bender said: With Baldrick as chancellor and lieutenant George as defence Secretary Nursey could be health Secretary and Queenie as Home Secretary 1 Quote
dynax Posted October 22, 2022 Posted October 22, 2022 Good morning Another weekend of working, this will be four in a row now 1 Quote
Bender Posted October 22, 2022 Posted October 22, 2022 9 hours ago, billy sugger said: Nursey could be health Secretary and Queenie as Home Secretary I can see the cabinet forming nicely Quote
Mississippi Bullfrog Posted October 22, 2022 Posted October 22, 2022 I should have known.....go sailing on Trafalgar Day and history will ensure that damage and injuries are sustained. Quote
Ian Frog Posted October 22, 2022 Posted October 22, 2022 16 minutes ago, Mississippi Bullfrog said: I should have known.....go sailing on Trafalgar Day and history will ensure that damage and injuries are sustained. Go on then what have you done? Cheers Ian Quote
billy sugger Posted October 22, 2022 Posted October 22, 2022 3 hours ago, Bender said: I can see the cabinet forming nicely Can't think of a position for Darling though, maybe foreign affairs? Quote
Bender Posted October 22, 2022 Posted October 22, 2022 3 hours ago, billy sugger said: Can't think of a position for Darling though, maybe foreign affairs? Chief whip Quote
billy sugger Posted October 22, 2022 Posted October 22, 2022 5 minutes ago, Bender said: Chief whip HA HA spot on Quote
Stu Posted October 22, 2022 Posted October 22, 2022 decided to burn some stuff in the log burner in the garage earlier! The f**ker has cracked 4 Quote
Mississippi Bullfrog Posted October 22, 2022 Posted October 22, 2022 10 hours ago, Ian Frog said: Go on then what have you done? Cheers Ian Ah, well..... firstly it was a very windy day (unlike the dawn of the day of the battle) so I thought I'd try out a new ( to me) radial sail. However on opening the bag it turned out to be a full size sail of which I have two already. I had to borrow a club radial to fit to my new lower mast section which meant swapping over the kicker and downhaul rigs. After about an hour on the water I was getting a bit tired and was on my last lap of the lake when on a gybe around the leeward mark my downhaul snapped. This nearly turned me over as it meant the sail instantly powered up. I avoided the capsize but in doing so the boom flew back across the boat cracking me on the head quite seriously. Getting back upwind to the launch area with a busted downhaul was interesting as even with the radial sail it was overpowered with no downhaul control. The boat is mended but I have an impressive lump on my head. Plus my pride is severely dented. 1 1 Quote
dynax Posted October 23, 2022 Posted October 23, 2022 13 hours ago, Stu said: decided to burn some stuff in the log burner in the garage earlier! The f**ker has cracked Which part has cracked? Put up a picture it might be repairable Quote
Stu Posted October 23, 2022 Posted October 23, 2022 4 minutes ago, dynax said: Which part has cracked? Put up a picture it might be repairable It's the top plate! I will get a pic soon. It is repairable but it's a cast stove so not easy to repair I have a plan though and hopefully I should be able to make a steel top for it 1 Quote
Stu Posted October 23, 2022 Posted October 23, 2022 @dynax You can see the crack that runs through the bolt! I am taking it apart today and getting a bit of 10mm steel plate and will make a new top for it 1 Quote
Bender Posted October 23, 2022 Posted October 23, 2022 Did you over cook it on first fire up after the summer off? Quote
MikeHorton Posted October 23, 2022 Posted October 23, 2022 1 hour ago, Stu said: @dynax You can see the crack that runs through the bolt! I am taking it apart today and getting a bit of 10mm steel plate and will make a new top for it Is it a Clarke or machine mart one I know they have form for cracking? Quote
Stu Posted October 23, 2022 Posted October 23, 2022 1 minute ago, MikeHorton said: Is it a Clarke or machine mart one I know they have form for cracking? Neither! although it looks the same this is an older one I wouldn't be surprised if they are the same to be fair Quote
MikeHorton Posted October 23, 2022 Posted October 23, 2022 22 minutes ago, Stu said: Neither! although it looks the same this is an older one I wouldn't be surprised if they are the same to be fair Fingers crossed its repairable 1 Quote
Tiggie Posted October 23, 2022 Posted October 23, 2022 Thinking of you in these dark times @Stu 1 4 Quote
Stu Posted October 23, 2022 Posted October 23, 2022 2 minutes ago, Tiggie said: Thinking of you in these dark times @Stu I have central heating! its fine! I just need to fix it before it gets cold and I have to go in the garage 1 Quote
Tiggie Posted October 23, 2022 Posted October 23, 2022 The log burner was among the main things I really wanted out of My Wife's Dad's shed when he passed. He loved his and would always have it going during the cold months. Unfortunately when the house was put up for sale it was listed as part of the property so I couldn't take it out 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.