Jump to content

Garage floors


Lateralus
 Share

Recommended Posts

Now I bet that exciting topic grabbed your attention!

 

I'm wanting to get the garage in our new house in a somewhat nicer condition, including painting the walls and floor. The floor is bare concrete at the moment, so should I just slap some masonry paint on it, or go for an epoxy option (which seems to require rather more prep). 

 

I'm also going to have to paint it in stages as I move the stuff around, since I can't shift it all out at once, so would that cause an issue with an epoxy finish?

 

For some reason this whole project is far from top of the other half's agenda, but I'm keen to try and get it sorted!

Link to comment
Share on other sites

16 minutes ago, KiwiBob said:

I would go with a garage floor paint! ... https://kitchenhome.co.uk/best-garage-floor-paint/

I sealed my garage concrete floor with PVA & then painted with Wickes garage floor paint - 2 years later it was flaking off !!

Link to comment
Share on other sites

I have NEVER had success trying to paint a garage floor. I have used both standard floor paint and most recently an epoxy. I sealed the floor prior to painting and followed all the rules but before long, especially if you park a car with hot tyres on it, the next time you take the car out the paint follows.

Link to comment
Share on other sites

On Saturday I'm off to my local All Year Bikers to get my bike prepped for winter as I'm a lazy bast*rd and can't be bothered to do it myself.  However the guy who does it has his main business laying some kind of fancy garage flooring which is insulating and god knows what else. Can't remember what it is for the life of me. Some kind of tiling I think.

Link to comment
Share on other sites

Resin is the most hard-wearing but also more work. But if there's any damp it's the only way to go. 

 

PVA can work but it's not as durable especially if there's damp around.

 

There are some very good interlocking tiles that are hard-wearing and resistant to most fluids likely to be spilt in a garage. 

 

Personally I'm a cheapskate and just use old carpet. 

Link to comment
Share on other sites

The best thing about using old carpet on a garage floor is when (not if ) you drop some small essential part you can pick up the sides and let all the detrius collect in the middle for the examination and retrieval process.

Don`t ask how I know.

I tend to paint clean floors without the pva step first to get a good bond then go on the hunt for old carpet.

Cheers

Ian

  • Like 1
Link to comment
Share on other sites

10 hours ago, Ian Frog said:

The best thing about using old carpet on a garage floor is when (not if ) you drop some small essential part you can pick up the sides and let all the detrius collect in the middle for the examination and retrieval process.

Don`t ask how I know.

I tend to paint clean floors without the pva step first to get a good bond then go on the hunt for old carpet.

Cheers

Ian

The other thing about carpet is that small bits don't bounce off the hard floor and disappear into oblivion.

  • Like 1
Link to comment
Share on other sites

Stay away from floor paint. The idiot who invented it should be shot!!

 

There are several alternatives depending on your budget and the floor conditions.

If your floor is in good condition, levelled properly and you just want to add some finish to it then you could go for epoxy resin or the rubber interlocking tiles.

You have the option of self-levelling screed with epoxy components

All mentioned have good chemical resistance so a oil or fuel spill won't affect them

 

Rubber tiles:

https://www.rackingsolutions.co.uk/interlocking-rubber-floor-tile-garage-flooring-gym-flooring-500mm-x-500mm-x-15mm.html?msclkid=18ee5c21aac71ae888b13dafb76f1c77

 

epoxy concrete:

https://concreteflooringsolutions.co.uk/blog/self-levelling-epoxy-screeds/

 

https://concreteflooringsolutions.co.uk/blog/self-levelling-epoxy-screeds/

 

epoxy resin

https://www.garageflex.co.uk/garage-resin-floors.php

 

Note that the brands are indicative only and high quality products will last a lot longer than cheaper ones.

Link to comment
Share on other sites

I put this stuff down in march easy to lay and cut and no hassle my brother has tried prepping and painting and flaked after a year. This is not more expensive than resin and no subsequent maintenance. I use a checker plate pad under the stand but even with sudestand down directly on the floor it's fine. Made from recycled plastic.

 

https://garagefloorsdirect.co.uk/diamond-checker-durbar-floor/

 

Link to comment
Share on other sites

I made the mistake of using paint,  supposedly designed for garage floors.  Within 18mths it was flaking.  Every time I went from the garage into the house I was dragging flaking paint in with me, the wife was going mad!  Took me a whole morning to strip the garage and pressure wash to try and get rid of it.  I would never use paint again.  I opted for this rubber flooring,  easy to lay and keep clean,  hard wearing and it's still going strong.  https://www.polymax.co.uk/rubber-matting-rubber-flooring/garage-flooring/circa-std-matting-roll

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Welcome to The Motorbike Forum.

    Sign in or register an account to join in.

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Please Sign In or Sign Up